[32-513-114] 1x4 Clamper/DC Restore Video Distribution Amplifier

Description

The ProSeries Clamper/DC Restore Video Distribution Amplifier provides four composite video outputs from one input.

This unit also provides either a clamping function or a restore function.

Single Unit Pricing $ 463.00

Highlights

  • 1X4 Composite Video Distribution Amplifier
  • Differential Input
  • Clamping Function
  • DC Restore Function
  • Variable Global Gain
  • Fully encapsulated in epoxy
  • Unit has two 6-32 threaded inserts for mounting
  • Configuration: one input, four outputs

Features

GroupProSeries
# Channels1
Inputs/Channel1
Outputs/Channel4
Input 1 Signal TypeComposite Video
Input 1 CouplingDC
Input Configuration 1Standard 75 Ohms
Gain ConfigurationGlobal
Input 1 ConnectorBNC
Output 1 Signal FormatComposite Video
Output 1 CouplingDC
Output Configuration1Standard 75 Ohms
Output 1 ConnectorsBNC
Power Connector2 Pin 2.5mm TB
Input Voltage 110-28 VAC
Input Voltage 212-32 VDC
Height.65
Width4.4
Depth2.2
Low Operating Temp (C)-40
High Operating Temp (C)80
Power BypassNO
MountingTwo 6-32 Inserts

ASK A QUESTION OR REQUEST A QUOTE!


#


Power Supply

This unit has a non-isolated internal switcher power supply (FlexPWR). The unit will operate correctly on 10-28 VAC or 10-32 VDC. The power input is protected so power can be applied in either polarity. The supply provides the internal electronics with power with the ground of the video circuits being the same as the input power ground. The power connector is a 2-pin 2.5mm terminal block with detent retention that can support high vibration environments.

Package

The package for this unit consists of a solid epoxy block. The internal electronics are assembled and tested before the encapsulation process. During the encapsulation the printed circuit board(s) are placed in a five sided box made of RTV mold parts. The cavity is filled with epoxy and the lid (top) of the mold is inserted. The curing process takes 24 hours. This type of package seals the electronics so water and contamination cannot affect the internal electronics. This type of package also provides superior resistance to shock and vibration compared to a metal or plastic box enclosure.