[11-534-102] 1X2 Composite Video DA, FlexPwr, Loop-Thru Input with Individual Variable Gain, BNC Connector


1X2 Composite Video DA, FlexPwr, Loop-Thru Input with Individual Variable Gain, BNC Connector Composite video distribution amplifier are compact, reliable, and high-quality for broadcast, professional AV, security, military,and manufacturing applications. Exceptionally flat gain characteristics across the entire bandwidth.

Single Unit Pricing $322.00


  • True 75 Ohm BNC connectors provide accurate matching to coax cable input and outputs
  • Sophisticated power supply circuitry to eliminate interference from noisy or poorly regulated power sources
  • Exceptionally flat gain characteristics across the entire bandwidth to provide the highest quality signal reproduction
  • Epoxy encapsulated "Brick" is virtually impervious to environmental extremes
  • Designed to the demanding needs of broadcast engineers, rugged enough for military applications, and competitively priced


# Channels1
Input 1 Signal TypeComposite Video
Input 1 CouplingDC
Input Configuration 1Standard 75 Ohms
Gain ConfigurationIndividual
Input 1 ConnectorBNC
Output 1 Signal FormatComposite Video
Output 1 CouplingDC
Output Configuration1Standard 75 Ohms
Output 1 ConnectorsBNC
Power Connector4 pin 3.5mm TB
Input Voltage 112-24 VAC
Input Voltage 210-34 VDC
Low Operating Temp (C)-40
High Operating Temp (C)80
Power BypassNO
MountingTwo 6-32 Inserts



Power Supply

This unit has an isolated internal switcher power supply. The unit will operate correctly on 12-24 VAC or 10-34 VDC. The power input is protected so power can be applied in either polarity. The supply provides the internal electronics with power totally ground isolated form the power input. No opto electronics are used so the unit is not temperature limited by the isolated supply. The power connector is a four pin plug with jack screws so the power connection can support high vibration environments. In addition to the two pins used for power input, a third pin provides access to the internal electronics ground circuit. The fourth pin provides access to an internal chassis ground that connects to internal ESD protection devices.


The package for this unit consists of a solid epoxy block. The internal electronics are assembled and tested before the encapsulation process. During the encapsulation the printed circuit board(s) are placed in a five sided box made of RTV mold parts. The cavity is filled with epoxy and the lid (top) of the mold is inserted. The curing process takes 24 hours. This type of package seals the electronics so water and contamination cannot affect the internal electronics. This type of package also provides superior resistance to shock and vibration compared to a metal or plastic box enclosure.