The VAC # 11-013-904 consists of a 1X4 baseband video distribution amplifier packaged in a small epoxy block with connectors. This VAC Mini Function Block product is intended to be designed into a user’s product and hard-wired into the system.
The product provides 6-32 threaded mounting holes so the user can mount the Mini Function Block.
The dimensions of the Mini Function Block are designed so the product can be mounted to a PC card and slide into standard PC card racks.
The VAC # 11-013-904 does not ship with any type of power supply. It is left to the user to provide correct power. The DC-200MHz frequency response is dependant on how the device is connected to the users system.
Using high quality miniature video coax cable is recommended.
Single Unit Pricing $274.00
|Input 1 Signal Type||Composite Video|
|Input 1 Coupling||DC|
|Input Configuration 1||Standard 75 Ohms|
|Input 1 Connector||2 pin Terminal Block|
|Output 1 Signal Format||Composite Video|
|Output 1 Coupling||DC|
|Output 1 Connectors||2 pin Terminal Block|
|Power Connector||2 Pin 2.5mm TB|
|Input Voltage 2||8-32 VDC|
|Low Operating Temp (C)||-40|
|High Operating Temp (C)||80|
|Mounting||Two 6-32 Inserts|
The package for this unit consists of a solid epoxy block. The internal electronics are assembled and tested before the encapsulation process. During the encapsulation the printed circuit board(s) are placed in a five sided box made of RTV mold parts. The cavity is filled with epoxy and the lid (top) of the mold is inserted. The curing process takes 24 hours. This type of package seals the electronics so water and contamination cannot affect the internal electronics. This type of package also provides superior resistance to shock and vibration compared to a metal or plastic box enclosure.