[17-191-234] 4 x 1 Unbalanced Stereo Audio Switch

Description

The 17-191-234 Unbalanced Stereo Audio Switch has four audio inputs and one audio output per channel. It is controlled either locally with a 3-position DIP switch, or remotely through a 6-pin mini-DIN style connector. A status output port (6-pin mini-DIN) may be used to slave another switch with remote capability or to trigger other equipment used for audio monitoring purposes.

Please contact VAC for Pricing


Features

GroupProSeries
# Channels4
Inputs/Channel2
Outputs/Channel1
Input 1 Signal TypeUnbalanced Audio
Input 1 CouplingDC
Input 1 Connector3 pin Terminal Block
Output 1 Signal FormatUnbalanced Audio
Output 1 CouplingDC
Output 1 Connectors3 pin Terminal Block
Power ConnectorP5
Input Voltage 112 VAC
Height1.4
Width4.4
Depth2.2
Low Operating Temp (C)-40
High Operating Temp (C)50
Control 1Contact Closure
Control 1 Connector6 pin DIN
Power BypassNO
MountingTwo 6-32 Insert


ASK A QUESTION OR REQUEST A QUOTE!


#


Power Supply

This unit has a very basic linear power supply with a 12 VAC input voltage requirement. A 12 VAC wall transformer (120 VAC input) is supplied with each unit. By using the wall transformer the power system provides ground isolation between the input power and the video circuits. The power supply uses a half wave rectifier design to develop the internal positive and negative voltage rails for the active operational amplifiers.

Package

The package for this unit consists of a solid epoxy block. The internal electronics are assembled and tested before the encapsulation process. During the encapsulation the printed circuit board(s) are placed in a five sided box made of RTV mold parts. The cavity is filled with epoxy and the lid (top) of the mold is inserted. The curing process takes 24 hours. This type of package seals the electronics so water and contamination cannot affect the internal electronics. This type of package also provides superior resistance to shock and vibration compared to a metal or plastic box enclosure.