This video distribution amplifier is compact, reliable, and high-quality for broadcast, professional AV, security, military applications.
VAC delivers cost-effective, professional grade HD solutions that fit your most demanding requirements.
Single Unit Pricing $352.00
- Sophisticated power supply circuitry to eliminate interference from noisy or poorly regulated power sources
- Exceptionally flat gain characteristics across the entire bandwidth to provide the highest quality signal reproduction
- Epoxy encapsulated "Brick" is virtually impervious to environmental extremes
|Input 1 Signal Type||Y/C Video|
|Input 1 Coupling||DC|
|Input Configuration 1||Standard 75 Ohms|
|Input 1 Connector||4 pin DIN|
|Output 1 Signal Format||Y/C Video|
|Output 1 Coupling||DC|
|Output Configuration1||Standard 75 Ohms|
|Output 1 Connectors||4 pin DIN|
|Power Connector||2 Pin 2.5mm TB|
|Input Voltage 1||10-28 VAC|
|Input Voltage 2||10-32 VDC|
|Low Operating Temp (C)||-40|
|High Operating Temp (C)||80|
|Mounting||Two 6-32 Inserts|
This unit has a non-isolated internal switcher power supply (FlexPWR). The unit will operate correctly on 10-28 VAC or 10-32 VDC. The power input is protected so power can be applied in either polarity. The supply provides the internal electronics with power with the ground of the video circuits being the same as the input power ground. The power connector is a 2-pin 2.5mm terminal block with detent retention that can support high vibration environments.
The package for this unit consists of a solid epoxy block. The internal electronics are assembled and tested before the encapsulation process. During the encapsulation the printed circuit board(s) are placed in a five sided box made of RTV mold parts. The cavity is filled with epoxy and the lid (top) of the mold is inserted. The curing process takes 24 hours. This type of package seals the electronics so water and contamination cannot affect the internal electronics. This type of package also provides superior resistance to shock and vibration compared to a metal or plastic box enclosure.