[12-533-144] 1 x 4 Component Video DA, (3 Channel), HDTV,Unity Gain, loop Thru

Description

The VAC model 12-5331-144 HDTV Video Distribution Amplifier provides four video outputs from each of three loop-thru inputs for component video signals. The 12VAC wall transformer provides isolated power to the Brick to control ground loops.

Single Unit Pricing $596.00

Features

GroupProSeries
# Channels1
Inputs/Channel3
Outputs/Channel4
Input 1 Signal TypeComponent Video
Input 1 CouplingDC
Input Configuration 1Standard 75 Ohms
Gain ConfigurationUnity
Input 1 ConnectorBNC
Output 1 Signal FormatComponent Video
Output 1 CouplingDC
Output Configuration1Standard 75 Ohms
Output 1 ConnectorsBNC
Power Connector2 Pin 2.5mm TB
Input Voltage 110-28 VAC
Input Voltage 210-32 VDC
Height2.15
Width4.4
Depth2.2
Low Operating Temp (C)-40
High Operating Temp (C)80
Power BypassNO
MountingTwo 6-32 Inserts

ASK A QUESTION OR REQUEST A QUOTE!


#


Power Supply

This unit has a non-isolated internal switcher power supply (FlexPWR). The unit will operate correctly on 10-28 VAC or 10-32 VDC. The power input is protected so power can be applied in either polarity. The supply provides the internal electronics with power with the ground of the video circuits being the same as the input power ground. The power connector is a 2-pin 2.5mm terminal block with detent retention that can support high vibration environments.

Package

The package for this unit consists of a solid epoxy block. The internal electronics are assembled and tested before the encapsulation process. During the encapsulation the printed circuit board(s) are placed in a five sided box made of RTV mold parts. The cavity is filled with epoxy and the lid (top) of the mold is inserted. The curing process takes 24 hours. This type of package seals the electronics so water and contamination cannot affect the internal electronics. This type of package also provides superior resistance to shock and vibration compared to a metal or plastic box enclosure.